Traditional sand and gravel production is generally divided into multi-stage crushing. Primary and secondary crushers are generally jaw crushers + impact crushers or jaw crushers + cone crushers. This configuration can solve the requirements for materials with higher hardness or the particle size of finished products. Taller customers. So, is there a machine that can both eat aniseed and shape it? It can produce both stone and sand. Box crusher came into being.

In fact, the structure of the box crusher is not complicated. It combines the advantages of hammer crusher and impact crusher, increases the size of the feed port and the weight of the inner hammer, and installs a blocking device inside the feed port to prevent excessively large raw materials from entering the machine cavity and causing clogged. Driven by the motor, the hammer head rotates at high speed to impact and crush large pieces of material at the bottom. This fully reflects the advantage of using small to defeat big. Large pieces of material gradually break into smaller pieces. Then it enters the crushing chamber for further crushing. In addition, there is a sieve plate at the bottom to control the size of the discharged particles.

   Box crushers can give full play to their advantages when crushing materials with medium hardness and below, and can replace the functions of jaw crushers and impact crushers to a certain extent, especially in the process of crushing construction waste. There are very good results.