During the operation of the hammer crusher, due to the different size, softness and hardness of the material particles, the discharged particle size is uneven, which affects production efficiency and product quality.

So how to adjust the discharge particle size of the hammer crusher?

   Here are some commonly used methods:

   1. Adjust the discharge gap:

   By adjusting the position of the discharge port, the particle size of the product can be changed. When the discharge port is located below the two rotors, the feed particle size is larger than the discharge particle size. Therefore, the products at this position are mostly large-sized coarse or medium crushed products; when the discharge port is located between the two rotors, the situation is opposite. Generally speaking, finely divided products are smaller in size than medium and large pieces.

   2. Adjust the height of the hammer head:

   According to the particle size of the required product, the hammer is raised or lowered to change the particle size of the discharged material. For example, if sand needs to be produced, the speed of the hammer head should be reduced to increase its effective length. On the other hand, if you need to make it into smaller pieces, you can lift it. However, it should be noted that if the speed of the hammer head is increased, the hard surface layer that has been formed will be worn. Therefore, reasonable control is required.

   3. Adjust the height of the counterattack plate:

   In order for the product to have a suitable shape, the installation height of the impact plate must be adjusted according to the hardness of the material. In general, the harder the material, the lower the strike plate should be.

   4. Replace the lining:

   The degree of wear of the liner can also affect the performance of the crusher. Severe wear will not only increase equipment resistance, but also cause equipment blockage. Therefore, it should be replaced in time.

   Henan Global Heavy Industry is a professional crusher manufacturer with many years of experience in producing and selling crushing equipment. The crushers we produce are sold overseas and have won unanimous praise from domestic and foreign customers. We provide a series of related services such as crusher production and maintenance, crusher price quotations, etc. If you need it, please call +8613383841555 for related consultation.